Home >> Products >> CNC Router >> ATC CNC Router >> 4x8 CNC Router with Tool Changer and Heavy Duty Base

4x8 CNC Router with Tool Changer and Heavy Duty Base

Model: EA-1325CATC

Category: ATC CNC Router

Brand: EagleTec CNC 4x8 CNC Router with Tool Changer and Heavy Duty Base

Condition: New Condition

Reference Price: U.S.$19,500 / SET

Price Range: USD16000 to USD22000 / SET as per the different configuration

Supply Ability: 200 Sets Monthly

Availability: production started after order confirmation (PreOrder)

Lead Time: 20 to 25 days 

Warranty: 12 months 

Payment Method: T/T, Western Union, Money Gram, Paypal

H.S. Code: 84659900.00

Recommendation: 4x8 CNC Router with Tool Changer and Heavy Duty Base4.8 based on 5.0



The CNC Router with tool changer belongs to the high-end configuration woodworking cnc machine. Compared with manual tool change cnc wood router, the benefit of automatic tool changer is that the tools are changed automatically and no need to make the machine stop for tool changing. This makes the machine can complete the routing jobs with multiple router bits tools on the basis of a one-time zero-point setup, without any stopping or pause before completion. In the production of cabinets and other panel furniture which need to be finished by multiple tools, the 4x8 cnc router with tool changer has a greater advantage than manual tool change ones on both productivity and accuracy. Disc automated tool changer CNC router with drum type ATC kit for sale at reasonable cost now. 

If you are ok to go with working size of 1300x2500mm, let's move to the next part. If looking for a bigger one, please check on the router cnc 2030 ATC machine or cabinet cnc machine with 2000x4000 bed

Need a smaller ATC machine? Please check out 2x3 cnc router with tool changer

atc cnc router for cabinet making - photo

Why is The CNC Router with Automatic Tool Changer Good for Cabinet Making?

• All cabinet products have such features, especially the cabinet doors. All the patterns on them are simple but they have to be completed with multiple tools; in the machining course, each tool only works for a short time like several minutes as maximum and then need to change another tool to go on; and every workpiece needs at least 3 tools to complete, some perhaps need 4 to 5 router tools. 

• The cnc router table with tool changer EA-1325CATC is equipped with a carousel type (also been called disk-type or circle-type) automatic tool changer; the cnc tool magazine can have 10 tools in stock for machining. Eight tools are sufficient for all cabinet jobs, and the tool change time of 3 seconds makes the productivity greatly improved. Its big advantage is that it saves time for multiple zero-point setups and multiple manual tool changes. In addition, all workpieces are completed on the basis of one time zero setup, in this way, finished jobs get better accuracy. 

You might be wondering: why?

Because if you set the origin multiple times (when using manual tool change machine), an error will be generated every time when compared with the first origin point.

atc cnc router with circle style tool magazine – photo

Advantage of EagleTec 4x8 CNC Router with Tool Changer

• Equipped with genuine Italy HSD 9.0kw auto tool change spindle with 24,000RPM. Air-cooled, ISO30 tool holders. Model. ES929

Italy HSD 9.0kw auto tool change spindle on EagleTec ATC cnc router – photo

• The Z-axis has a dual pneumatic counter-balance cylinder to allow very fast and accurate Z-axis positioning.

atc cnc router with dual pneumatic counter balance cylinder – photo

• Disk type automatic tool changer, with 10 stations there. As options, the tool storage can be customized to have 12 or 16 positions. Prefer linear tool changer? Please check on linear ATC CNC router with 4x8 bed

8 positions dis type tool storage – photo

• Adopting Delta AC servo as the driving system of the machine, and combined with Taiwan's SYNTEC CNC systems, this combination makes control mode a real closed-loop control.

electronic cabinet with delta servo and syntec system – photo

• The electronics and wiring part is strictly in accordance with European CE standards, and special protection such as thermal overload relays, stopping resistors, and fuses are provided to protect the safe operation of the cnc router with automatic tool changer. Please refer to the electric cabinet photo above.

• A planetary reducer is used as a reduction gear to replace the ordinary gearbox. The idle travel speed reaches to 70,000mm/min.

• All the linear guides are lubricated from a central lubrication system. The positive-displacement pump is adopted as the lubricator, which delivers a uniform amount of oils to each linear bearing. There will be no problem with uneven oil delivery.

positive-displacement lubricator on the beam of atc cnc router – photo

• T style heavy duty machine base and vac-sorb working table. The machine base is welded with seamless steel structure; processed by high-temperature tempering treatment and vibrating stress relief (VSR) to reduce residual stress, and it is supported by 8 legs with adjustable leveling feet. The vacuum table is divided into 6 vacuum zones. 

heavy duty atc machine base with vac-sorb table – photo

Application of Disc Automated Tool Changer CNC Router With Drum Type ATC Kit

Applicable Industry of CNC Router with 10 Station Tool Changer

It's perfect for Cabinet making, Panel Furniture making, and other multiple tools works.

Materials Good For CNC Industrial Router for Aluminum Parts With 10 Station Tool Changer

Wood, MDF, PVC, foam, aluminum, and more. 

Technical Parameter of CNC Router Machine with Tool Changer

Model. NoEA-1325CATC
Machine Typeheavy duty cnc 4x8 router with automatic tool changer
Max. Idle Speed  70,000mm/min
XYZ Stroke1300x2500x300mm (4'x8')
Axis Quantity3 axes
Electronic SpindleOriginal HSD 9.0kw, air cooling ATC spindle, 24000RPM, ISO30 tool holder
ATC Magazine KitDisc type, 10 stations (Drum type)
XYZ MotionDelta AC servo motors and drivers, Z-axis motor with holding brake
CNC ControllerSYNTEC, industrial computer
Communication CommandG code (***.mmg, ***.nc)
InverterDelta 11.0kw
Work TableVac-sorb table with 6 zones
XY TransmissionHelical rack and pinion, planetary gear (ratio 5:1)
Z TransmissionTBI rolling ballscrew, 32mm size, coupling
Linear GuidesTaiwan PMI linear guideway and bearings, square type, size 30mm
Vacuum PumpAir ring dry type, 5.5kw
Other ElectronicsOmron, Schneider
Power Consumption23KW (vacuum pump included)
Working PowerAC380V/50Hz, 3Ph 4 Wires. (220V option can be customized)
Net Weight1800KGS
Machine Foot-print131"Lx126"Wx90"H (3350x3200x2280mm)
Packing Dimension3400x2250x2300mm

If you like the cnc router with 12hp spindle and tool changer for sale here, please ask for a quote now


Follow Us

Get Your FREE Quote
(Your email will be kept private)