Model: EA-1325PATC
Category: ATC CNC Router
Brand: EagleTec CNC 
Condition: New Condition
Reference Price: U.S.$13,500 / SET
Price Range: USD9000 to USD16000 / SET as per the different configuration
Supply Ability: 200 Sets Monthly
Availability: Production after order (PreOrder)
Lead Time: 15 to 20 days
Warranty: 12 months
Payment Method: T/T, Western Union, Money Gram, PayPal
H.S. Code: 84659900.00
Recommendation: 
4.5 based on 5.0
Pneumatic ATC CNC router is one economical type auto tool change cnc router. Three spindles are mounted with 3 different kinds of tools; Multi-spindles are auto-shifting to perform the tool change. The power for spindle switching comes from the pneumatics device of the machine, which is the cylinder above the spindle. That’s why this type of machine is called a pneumatic ATC cnc router. It's a high-performance-to-price ratio wood cnc machine when compared with linear ATC CNC router. If you are looking for an economical ATC Router, this is a good choice!
If you are looking for a machine with tool storage, please check this model out: 1325 ATC cnc router.
• With tool auto-checking instrument: The zero-point of Z-axis establishments can be more accurate and more convenient. Save your time cost and get better accuracy.
• Adopting advanced WEIHONG NK260 numerical control system with handwheel, which supports close loop control and automatic tool change. High resolution and high performance. The handwheel is much helpful for the process of zero-point setting.
• Delta AC servo equipped on XYZ axes, fast, precise and quiet operation. This is a close loop servo driven system, which is a higher performing and zero maintenance system.
• Each spindle is controlled by a separate frequency converter, and this one-to-one control is the most stable way. Three-spindles are auto shifting to perform the tool change.
• Vacuum table with Pneumatic Material Alignment Pop-ups, quickly position and complete the clamping of the workpiece; Highly efficient.
• Machine base of our pneumatic ATC cnc router is welded with 6mm thick square steel tube, and machined by 5 axis CNC machining center, please noted that, our base is not machined by table planning machine. The accuracy difference between the two is very large.
• Machine is supported by 6 legs with adjustable leveling feet.
• All the linear guides are centrally lubricated from a central system. Advanced automatic lubrication pump is adopted; You can set the time for lubricating.
This router machine is ideal for furniture panel making, such as cabinet, door panel, office furniture, and more.
MDF, Solid Wood, PVC, Foam, Epoxy, and more.
• Working size: X - 1300mm, Y – 2500mm, Z – 300mm
• 3.0kw electronic spindles – 3 pieces
• VFD inverter – 3 pieces (Fuling Brand)
• WEIHONG NK260 numerical system
• Delta AC servo – 4 sets
• HIWIN linear guides
• Communication Command: G Code
• Compatible Software: ArtCAM, Aspire, UcanCAM, Type 3, JD Paint
• Pneumatic Material Alignment Pop-ups
EagleTec pneumatic ATC cnc router is loaded on a steel tube pallet first, then tightly wrapped with PVC films, finally packed with plywood case. Model.EA-1325PATC is packed in complete machine mode.
| Model No. | EA-1325PATC |
| Type | Pneumatic ATC Routing Machine |
| Axis Quantity | 3 - Axis |
| X Stroke | 1300mm (51") |
| Y Stroke | 2500mm (98") |
| Z Stroke | 300mm (11.8") |
| Max. Feed Height | 300mm (11.8") |
| Fast Travel Speed | 70,000mm/min |
| Max. Feeding Rate | 40,000mm/min |
| X Drive | Delta AC servo 750w |
| Y Drive | Delta AC servo 750w, dual drive |
| Z Drive | Delta AC servo 750w, with holding brake |
| X Y Transmission | Helical rack and pinion, Gearcase |
| Z Transmission | Rolling ballscrew |
| Linear Guides | HIWIN square type 20mm (or same quality other brands) |
| Electric Spindle | 3.0kw, air-cooled, 18,000RPM – 3PCS |
| Collet Size | ER25 |
| Tool Diameter Range | 3.175 ~ 16mm |
| Inverter | 3.7kw, Fuling brand - 3PCS |
| Tool Calibration Sensor | With |
| Numerical System | WEIHONG NK260 |
| Communication Command | G code |
| Compatible Software | ArtCAM, Aspire, UcanCAM, Type 3, JD Paint |
| Workpiece Clamping | By vac-sorb |
| Vacuum Pump | Air ring, dry type, 5.5kw |
| Workpiece Positioning | Pneumatic Material Alignment Pop-ups |
| Other Electronics | Schneider, Omron, CHNT |
| Electronics Protection | Thermal relay, fuses, earth leakage circuit breaker, protection earth |
| Working Power | AC380V/50Hz, 3Ph (or customized) |
| Max. Power Consumption | 23KW |
| Net Weight | 1,700KGS |
| Gross Weight | 1,800KGS |
| Package Way | The complete machine in plywood case |
| Package Dimension | 3350x2260x2200mm (17CBM approximately) |
If you like our machine, please request a quote now.
4x8 CNC Router with Tool Changer and Heavy Duty Base
Model. EA-1325CATC, disc tool storage, Italy ATC Spindle, AC servo
CNC Router with ATC For Sale
Model. EA-1530CATC, carousel tool changer, HSD ATC Spindle, Yaskawa servo
Copyright © Jinan EagleTec Machinery Co., Ltd. All Rights Reserved | Sitemap
