CNC Woodworking Machine for Plywood Cutting and Routing

CNC Router for Plywood in Action

Quick Details of CNC Woodworking Machines for Sale

• Heavy-load trapezoidal machine base

• Working Envelope: 6x8 (1850x2500mm)

• Two individual head

• Air-cooled spindle 6.0KW – 2 Pieces

• Maximum simultaneous axes: 3 axis CNC

• High torch and most reliable stepper motion system

• XY Transmission: helical rack and pinion

• Z Transmission: precise rolling ballscrew

• RichAuto Auto-Now A11E controller

• Vacuum Bed

• Individual Control Box

• Sheet material alignment pop-ups

Features of Woodworking CNC Machine with Two Individual Heads

• The dual independent machine head design provides more possibilities for production applications; when processing large-format wood panels, it can work like a single-head cnc router; when the material to be processed is smaller in size, the two heads can work simultaneously to increase output.

• Each head features an air-cooled spindle that has a power of 6 kW. High-power spindles provide numerous advantages in cutting processes.

• The wood work cnc machine is equipped with an independent floor-standing control box; it is very convenient for subsequent maintenance and other operations.

• All switches and indicator lights on the control panel are Schneider brand products, which are very durable.

• All the buttons are labeled in English.

• All small electronic components in the cabinet are Schneider brand; this part includes AC contactors, air switches, fuses, relays, etc.

• The workbed is equipped with three positioning cylinders along the Y-axis and two along the X-axis, which provides great convenience for positioning the wooden boards and improves production efficiency.

• The working bed adopts a two-in-one design, which cleverly integrates the PVC vacuum suction table and T-shaped slot; the workpiece can be held down to the table by vacuum suction; it can also be clamped with T-slot fixtures. So it provides you two options on clamping.

• The working bed adopts a two-in-one design, which cleverly integrates the PVC vacuum suction table and T-shaped slot; the workpiece can be held down to the table by vacuum suction; it can also be clamped with T-slot fixtures. So it provides you two options on clamping.

• All the EagleTec CNC machines come with dust shoes/dust hoods.

Plywood CNC Projects and Plans You Can Make

With this cnc for woodworking, you have so many plywood CNC projects you can do, including but not limited to plywood chairs, cnc plywood joints, cnc milled plywood furniture, plywood sawhorse, plywood shelves, plywood tables, plywood bar stools, plywood cabinets, plywood divider, plywood frame, plywood headboard, plywood house, plywood kitchen, oak plywood cnc sign, plywood roof trusses, plywood sofa and more.

Applicable Materials

All kinds of woods, including plywood, bamboo, MDF, Baltic, birch, solid wood, and more. 

Upgrade and Options

The following upgrades and options are sold separately

• Vacuum pump

• Italy original HSD spindle motor

• Planetary reducer on X/Y

• Dust collector/Vacuum cleaner

Free Accessories Coming Together with the CNC for Woodworkers

The standard accessories or spare parts would include:

• USB drive with a complete set of manual and tutorials inside

• Height adjustment leveling feet

• Toolbox

• Emergency stop spare

• ON/OFF button spare

• Limit sensor spare

• Fuse spare

• Timing belt spare

• Collet kit

• Spanner kit

• Router bit for sample making

• Rubber seals

• T-slot clamp kit

• Dust shoe/hood

How the CNC Machine for Woodworking is Safely Packed

• Use bubble wrap to wrap the electrical control cabinet; then wrap it with waterproof foam film.

• Wrap machine parts and accessories in bubble wrap.

• Wrap the gantry with stretch film.

• Brush the guide rails and racks with anti-rust oil.

• Place the machine base in a suitable position on the pallet; wrap it with bubble wrap and stretch film.

• Place the packaged gantry and electrical control cabinet on the table.

• Fix the machine base to the pallet with bolts.

• Place the vacuum pump, vacuum cleaner, and other accessories on the machine table and secure them with packing tape; then, wrap them with waterproof foam film; finally, wrap them tightly with stretch film.

• Seal the crate.

• Get it trucked out.

Maintenance for Plywood Cutting CNC Machine

By performing daily maintenance tasks effectively, you can ensure your machine's reliable performance, low failure rate, and durability. The job typically includes the following points.

• At the end of each day's work, please clean up the wood chips and sawdust that have been dropped on the machine, especially the transmission components such as linear guide rails, ballscrews, and racks.

• Regularly press the handle of the lubrication pump to lubricate the transmission parts to prevent them from oxidation and shorten the service life of the cnc plywood cutting machine.

Technical Datasheet of Woodworking CNC Machines

FAQs about the Woodworkers CNC Machine

Q: How To Use a CNC Machine For Wood?

A: Here are the typical steps to make a wood working CNC work:

• Create a G-code toolpath file

• Switch on the machine and perform home action to calibrate the coordinate system

• Set the workpiece origin (XY=0; Z=0)

• Select the toolpath file in the controller and get the parameters setup done

• Start the machining

Q: How Much Does a Woodworking CNC Machine Cost?

A: Based on different configurations, the price range of the machine will range from USD 3,500 to USD 70,000. Among them, the entry-level price is between USD 3,500 and USD 8,000; the advanced level falls into the price range from USD 8,000 to USD 30,000; and the professional-level machine would cost USD 30,000 to USD 70,000.

Q: How Thick of Wood Can a CNC Machine Cut?

A: Four typical wooden board thicknesses are 12mm, 15mm, 18mm, and 20mm. The CNC routers here can handle the cutting process of all of them. For some thin sheets, the machine can even cut multiple sheets at a time.

Q: Can a CNC Machine Make Furniture?

A: Yes, it can. The machine here is a good fit for furniture making.

Q: Can a CNC Machine Cut Plywood?

A: Yes, the machine can cut plywood. Many plywood products on the market, such as furniture and daily necessities, are produced by CNC.

Q: How Loud Is a Wood CNC Machine?

A: We have ever tested the noise value when the machine is running; the result we measured at that time was 80dB, and the test result was obtained when the ambient noise value was 53dB.

Q: What RPM is Needed for CNC Cutting Wood?

A: The typical spindle RPM for wood cutting is 24,000 or 18,000.

If you like the cnc machine for plywood shown here, please feel free to contact us to get a free proposal.